LVDS
ARQUIMEA LVDS family:

- Data transmission along twisted pair cables at very high data-rates.
- Low power. Low-voltage power supply compatibility. Low noise generation and excellent EMI performance.
- Typical applications: SpaceWire. Clock distribution networks.
- Available in soft IP core, space-grade ceramic and plastic packages.
- 0.25-um BiCMOS technology process. Fully European supply chain.
- Full compliance with the ANSI_EIA/TIA644A standard.
- Over 500Mbps data transfer rate per channel.
- Small propagation delay, low channel-to-channel skew and low jitter.
- Extended input common mode range from -4V to +5V.
- Cold-spare in all pins.
- Fail Safe protection.
- Input hysteresis implemented at the receiver side.
- TID: 300 kRad(Si).
- SEL immune up to LET of 60 MeV*cm²/mg.
- BER down to 1E-13 err/bit in GEO orbit.
- ESD protection above 8kV HBM.
PRODUCTS
Driver
Receiver
Transceiver
Repeater
Driver
AQLVD01
RAD-HARD Quad 500 Mbps Bus LVDS Driver
FEATURES
- 0 Mbps low jitter data path.
- 3 V power supply.
- LVCMOS/LVTTL compatible inputs.
- Enhanced Power Consumption.
- Cold sparing on all pins.
- 4ns Propagation delay in temperature range.
- Very Low skew.
- Radiation tolerant: 300 krad(Si).
- Latch-up free up to 67 MeVcm²/mg.
- ESD tolerance: 8 kV (HBM).
- 16 pins Ceramic Flat Pack (FP-16).
- ANSI TIA/EIA 644a LVDS standard Compliant.
- Space Quality level.
Receiver
AQLVR02
RAD-HARD Quad 500 Mbps Bus LVDS Receiver
FEATURES
- 0 Mbps low jitter data path.
- 3 V power supply.
- CMOS/TTL compatible Inputs/Outputs.
- Enhanced power consumption.
- Cold sparing on all pins.
- 4ns Propagation delay in temperature range.
- Very low skew.
- Extended LVDS input common mode [-4V; +5] V.
- Receiver input threshold ≤ ±100 mV.
- 50 mV (min) Input hysteresis.
- Fail Safe protection circuit.
- Radiation tolerant: 300 krad(Si).
- Latch-up free up to 60 MeVcm²/mg.
- ESD tolerance: 8 kV.
- 16-pins, Ceramic Flat Pack (FP-16).
- ANSI TIA/EIA 644a LVDS standard Compliant.
- Space Quality level.
Transceiver
AQLVT01
RAD-HARD Dual 500 Mbps Bus LVDS Transceiver
FEATURES
- Dual drivers, LVCMOS/LVTTL compatible inputs with LVDS outputs.
- Dual receivers, LVDS inputs with LVCMOS/LVTTL compatible outputs.
- 0 Mbps low jitter data path.
- 3V single power supply.
- Enhanced power consumption.
- Cold sparing on all pins.
- 4ns Propagation delay in temperature range.
- Extended LVDS Input Common Mode [-4; +5] V.
- Receiver input threshold ≤ ± 100 mV.
- 50 mV (typ) Input hysteresis.
- Fail-safe protection circuit.
- Radiation tolerant: 300 krad(Si).
- Latch-up free up to 60 MeVcm²/mg.
- ESD tolerance: 8KV.
- Packaging: 18-pin, Ceramic Flat Pack (CFP).
- ANSI TIA/EIA 644a LVDS standard Compliant.
- Space Quality level.
Repeater
AQLVP01
RAD-HARD Octal 500 Mbps Bus LVDS Repeater
FEATURES
- 0 Mbps low jitter fully differential data path.
- 250 MHz clock channel.
- 3V power supply.
- LVCMOS/LVTTL compatible inputs.
- Enhanced power consumption.
- Cold sparing on all pins.
- 5ns Propagation delay in temperature range.
- Extended LVDS Input Common Mode [-4; +5] V.
- Receiver input threshold ≤ ± 100 mV.
- 25mV (typ.) Input hysteresis.
- Fail-safe protection circuit.
- Radiation tolerant: 300 Krad(Si).
- Latch-up free up to 60 MeVcm²/mg.
- ESD tolerance: 8KV.
- 48-pin Ceramic Quad Flat Pack (CQFP).
- ANSI TIA/EIA 644a LVDS Standard Compliant.
- Space Quality Level.